Buy Any Laser Product
Shipping Over World

2W laser 808nm infrared laser pointer

$480.00

Buy it Now get a gift :
laser goggle or mini laser

Wavelength:808nm
Power:2000mW(2W)
Power supply: 1x18650, load the negative end (-) first and rotate the Tailcap clockwise tight.

Insert the Safety Pin into the Pinhole on Tailcap.
Press the Power Button.The orange color Button on the Tailcap is the Power Button.
The Blue Led on Power Switch is On.
The Led Indicator above the Mode Switch turn Red simultaneously. 
Long Hold the Power Switch and watch the Led Indicator turn Yellow three times successively. 
Short Hold the Power Switch Twice and watch the Led Indicator Turn Yellow Once per Hold.
The Beam is On now. 

The power level is 30% of the max output by default.
The beam output mode is CW(continuous wave) by default.
Short Hold the Power Switch again cycles 30%, 70% and 100% of the max power of the laser in operation.

Shifting the CW/Pulse Mode 
Short Click the Mode Switch. The laser beam mode Cycles CW to Pulse Mode. The preset Pulse frequency is 4Hz.
The Led Indicator above the Mode Switch Flash in Blue simultaneously. 
Another Short Click of Mode Switch would turn pulse mode to CW mode.

Shifting into Standby Mode 
Long Hold the Power Switch for Three Seconds would Shift the PL-D laser into Standby Mode( Ready Mode).
At Standby Mode, the Led Indicator is in Red, while the Blue Led on Power Switch remains On.
Either Short Hold the Power Switch or Short Click the Mode Switch will turn the laser beam on. 

The user can Shift between CW and Pulse Mode at either 30%, 70% or 100% of max power output.
Long Hold means Holding down the Power Switch continuously until you watch the Led Indicators Shine  yellow Three Times Successively.
Short Hold means Holding down the Power Switch briefly until you watch the Led Indicators Shine yellow.
Loose the finger suddenly after either Long Hold or Short Hold.

Trouble-shootings 
If No beam is On after the "Long Hold” and “Short Hold" operation, just Switch off by pressing the Power Button(orange Button on the Tailcap) and Switch it on and try again.

Focus  Adjutstable  Feature
Just like PL-C, the PL-D lasers are also equipped with the focus adjustable feature. For regular PL-D, the user can pinpoint the focus easily and burn things smoothly for fun; the adjustable beam size also enables the user to apply the PL-D laser for other uses like illumination.

Recommended Duty Cycle
PL-D 532/650/808/980/1064nm:  ≤ 2 minutes on, 20 seconds off
PL-D 405/445nm: ≤ 1 minutes on, 20 seconds off

Read more customer reviews below images.











Home ::  Laser Science  ::  Laser Diodes  ::  Laser Modules  ::  Q-switch Laser
Copyright © 2017 ArmLaser.